IJSTR

International Journal of Scientific & Technology Research

IJSTR@Facebook IJSTR@Twitter IJSTR@Linkedin
Home About Us Scope Editorial Board Blog/Latest News Contact Us
CALL FOR PAPERS
AUTHORS
DOWNLOADS
CONTACT
QR CODE
IJSTR-QR Code

IJSTR >> Volume 4 - Issue 4, April 2015 Edition



International Journal of Scientific & Technology Research  
International Journal of Scientific & Technology Research

Website: http://www.ijstr.org

ISSN 2277-8616



Al-7075 Malzemesinin Freze Tezgâhında Delme İşleminde Farklı Devir Ve İlerleme Hızları İçin Oluşan Titreşimlerin İncelenmesi

[Full Text]

 

AUTHOR(S)

C. Sevim, O. Genc

 

KEYWORDS

Index Terms: Al-7075, Vibration Analysis, Drilling Process, Titanium Nitride

 

ABSTRACT

Abstract: This study investigates the vibration of Al-7075 material during the drilling process by CNC milling machine using TIN covered drilling bit. A triaxial acceleration sensor is used for vibration tests. Drilling processes are made on same block for two different rate of feed, five different number of revolution and without cooling liquid. The same series drilling bits are used in the course of each drilling processes. Vibration values which occur during the drilling process under different conditions are investigated and optimum vibration values are determined as 100 mm/min rate of feed and 1250 rev/min.

 

REFERENCES

[1] Kalpakjian,S.1991.Manufacturing Processes for Engineering Materials Second Edition, Addision, Wesley, 42-75.

[2] Roukema J.C., Altintas Y., Generalized modeling of drilling vibrations. Part I: Time domain model of drilling kinematics, dynamics and hole formation, International Journal of Machine Tools & Manufacture 47 (2007) 1455–1473.

[3] Roukema J.C., Altintas Y., Time domain simulation of torsional–axial vibrations in drilling

[4] Roukema J.C., Altintas Y., Generalized modeling of drilling vibrations. Part II: Chatter stability in frequency domain, International Journal of Machine Tools & Manufacture 47 (2007) 1474–1485.

[5] Simon S.F. Chang, Gary M. Bone., Burr height model for vibration assisted drilling of aluminum 6061-T6, Precision Engineering 34 (2010) 369–375

[6] Tooraj Arvajeh, Fathy Ismail, Machining stability in high-speed drilling—Part 1: Modeling vibration stability in bending International, Journal of Machine Tools & Manufacture 46 (2006) 1563–1572

[7] Amor Messaoud, Claus Weihs, Franz Hering, Detection of chatter vibration in a drilling process using multivariate control charts, Computational Statistics & Data Analysis 52 (2008) 3208 – 3219