International Journal of Scientific & Technology Research

IJSTR@Facebook IJSTR@Twitter IJSTR@Linkedin
Home About Us Scope Editorial Board Blog/Latest News Contact Us

IJSTR >> Volume 6 - Issue 7, July 2017 Edition

International Journal of Scientific & Technology Research  
International Journal of Scientific & Technology Research

Website: http://www.ijstr.org

ISSN 2277-8616

An Experimental Study On Drill Vibration, Thrust Force And Surface Roughness In Drilling Of SCF/Carbon Fibre Composite

[Full Text]



B. Amar Babu, V. Pandurangadu



SCF/C Composites, Drill vibration, surface roughness, Thrust Force, Optimization



In the present work, SCF/carbon composite was prepared with a commercially available vinylester, methyl ethyl ketone peroxide (catalyst) and cobalt napthenate (accelerator). The prepared composite is aimed to use in aircraft application. The composite is treated to improve the characteristics of SCF/Carbon. Drilling characteristics were studied for both treated and untreated composites. As per Taguchi orthogonal array of L8, eight experiments were conducted on the composites and machining characteristics like thrust force, surface roughness and amplitude of drill vibration were measured. Interaction effect of parameter on the machine characteristics was studied using response surface methodology. Analysis of variance was also used to identify significant parameters for the three machining characteristics. A multi response optimization technique was used to optimise parameters for minimization of thrust force, surface roughness and amplitude of drill vibration.



[1]. Alper Uysal, 2016 Proc I Mech E Part B: J. Engg. Manu. DOI: 10.1177/0954405416662084

[2]. Rakesh P K, Singh I, and Kumar D, 2012 Proc. I Mech E Part L: J. Mat. Design and Applications DOI: 10.1177/1464420711430007

[3]. Ramesh B, Elayaperumal A, Satishkumar S, Anish Kumar and T Jayakumar,2016 Proc I Mech E Part L: J. Mat. 230(2) 558

[4]. Suleyman Neseli, 2014, Adv. in Mech. Engi. 2014 1

[5]. P Raveendran and P Marimuthu, 2015 Adv. in Mech. Engi. 7(12), 1

[6]. Plastics Vikas Dhawan , Kishore Debnath , Inderdeep Singh and Sehijpal Singh, 2016 Proc I Mech E Part L: J. Mat.: Des. and App. 230(2) 603

[7]. Palanikumar K, 2006 J. of reinf. Plast. and comp. 25,1739

[8]. Mohan N S, Ramachandra, Kulkarni S M, 2005 J. Reinf. Plast. and comp. , 24 1247

[9]. Pramendra Kumar Bajpai , Kishore Debnath and Inderdeep Singh , 2015 J. Thermoplastic Comp. Mat. DOI: 10.1177/0892705715575094

[10]. Rajasekaran T, Palanikumar K and Vinayagam BK, 2011 J. Comp. Mat. 46(7) 809

[11]. Francisco Mata Cabrera and Demetrio Fuentes, Issam Hanafi and Abdellatif Khamlichi, Abdallah Jabbour, 2012 J. Thermoplastic Comp. Mat. 25 101

[12]. Erol Kilickap, 2010 J. Comp. Mat. 45(6) 727

[13]. Krishnamoorthy A and Rajendra Boopathy S, Palanikumar K, 2009 J. Comp. Mate. 43 2885

[14]. Paulo Davim J, Francisco Mata,V, Gaitonde N, Karnik S. R, 2010 J. of Thermoplastic Comp. Mat. 23 5

[15]. Sarma P M M S, Karunamoorthy L, palanikumar K, 2008 J. Reinforced Plast. and Comp. 27 711

[16]. Prakash S and Palanikumar K, 2010, J. Comp. Mat. 45(16 1639

[17]. Prasad Babu GHV, Murthy BSN, Venkata Rao K and Ratnam Ch, 2015 Proc I Mech E Part B: J. Eng. Man. DOI: 10.1177/0954405415624349.