IJSTR

International Journal of Scientific & Technology Research

IJSTR@Facebook IJSTR@Twitter IJSTR@Linkedin
Home About Us Scope Editorial Board Blog/Latest News Contact Us
CALL FOR PAPERS
AUTHORS
DOWNLOADS
CONTACT
QR CODE
IJSTR-QR Code

IJSTR >> Volume 3- Issue 12, December 2014 Edition



International Journal of Scientific & Technology Research  
International Journal of Scientific & Technology Research

Website: http://www.ijstr.org

ISSN 2277-8616



Aerodynamic Performance Optimization Of Wind Turbine Blade By Using High Lifting Device

[Full Text]

 

AUTHOR(S)

Razeen Ridhwan, Mohamed Alshaleeh, Arunvinthan S

 

KEYWORDS

Keywords: Aerodynamics, Blade with flaps, CL VS α, CD VS α, CP VS X/C, CFD, Flaps, High Lifting devices, Riblets, pressure and velocity distribution over wind turbine blades, Wind Turbine.

 

ABSTRACT

Abstract: In the “Aerodynamic performance of wind turbine blade by using high lifting device” described that different velocity flow of air is passing through the wind turbine blade model and analyze through a numerical simulation that the pressure variation occur at that surface of the model. Before we built wind turbine blade in any strong wind blowing region the aerodynamic flow analysis is must for withstand the strong wind affects. In this chapter, basic nature of winds and types, wind affects through the wind turbine blade, formation of internal pressure and atmospheric boundary layer. This project could be done with the help of so many research papers were taken and followed in the literature review. The main tool we used in the project is CFD, so we gave some introduction about the CFD and how it could be used. Then we compared the results at the different models in different angles having with and without flap in 2D and 3D. We didn’t do any practical oriented models just we design the model in Gambit and analyze in the Fluent.

 

REFERENCES

[1] Arturo baron and maurizio quadrio, turbulent boundary layer over riblets. conditional analysis of Ejection-like events, int. J. Heat and fluid flow 18:188-196, 1997

[2] A. Baron and m. Quadrio, influence of riblets on the structure of a turbulent boundary layer, int. J. Heat and fluid flow, voi. 14, no. 3, september 1993
[3] A. Baron, m. Quadrio and l. Vigevano, on the boundary layer/riblets interaction mechanisms and the prediction of turbulent drag reduction, int. J. heat and fluid flow, vol. 14, no. 4, december 1993

[4] A. Pollard, passive and active control of near-wall Turbulence, progress in aerospace sciences vol. 33, pp. 689-708, 1997

[5] J. Reneaux, overview on drag reduction technologies for civil transport aircraft, european congress on computational methods in applied sciences and engineering Eccomas 2004

[6] K. N. Liu,* c. Christodoulout, o. Ricciust, and d. D. Joseph, drag reduction in pipes lined with riblets, aiaa journal october 1990, vol. 28, no. 10

[7] Michael'j. Walsh, riblets as a viscous drag reduction technique, nasa langley research center, hampton, virginia

[8] O.a. El-samni , h.h. Chun , h.s. Yoon , drag reduction of turbulent flow over thin rectangular riblets, international journal of engineering science 45 (2007) 436–454

[9] P.r. Viswanath, aircraft viscous drag reduction using riblets, progress in aerospace sciences 38 (2002) 571–600

[10] S.-j. Lee, y.-g. Jang, control of flow around a naca 0012 airfoil with a micro-riblet film, journal of fluids and structures 20 (2005) 659–672

[11] Zhang de-yuan, luo yue-hao, li xiang, chen hua-wei, numerical simulation and experimental study of dragreducing Surface of a real shark skin,science direct-jounal of hydrodynamics