|
Thermal Performances Of Two Phase Closed Thermosyphon With Different Inclination Angles
[Full Text]
AUTHOR(S)
Shrikant V. Pawar, Abhimanyu K. Chandgude,
KEYWORDS
Acetone, Aluminum, Angle, Condenser, Evaporator, Inclination, Thermocouple.
ABSTRACT
Thermal performance of a two phase closed thermosyphon (TPCT) is analyze for different inclination angles. TPCT is circular pipe and filled with acetone. A Simple circular pipe made up of aluminum and it tested for heat input of 50W to 300W at a different inclination angle 30, 40, 50, 60, 90. TPCT used with 30â„… filling ratio. Thermal efficiency of TPCT and the mean temperature difference between evaporator and condenser (Te-Tc) determined and plotted with 30â„… of filling ratio. Whole analysis shows that inclination has no significant effect thermal performance of TPCT.
REFERENCES
[1] A.Brusly solomon, R. Roshan, heat transfer performance of an anodized and non-anodized TPCT with refrigerant as working fluid, Int. J. heat and mass transfer 82 (2015).
[2] K.S.Ong, W.L.Tong, inclination and fill ratio effect on water filled TPCT, IHPS, 2011.
[3] H.Mirshahi, M.Rahimi, effect of heat load, fill ratio and extra volume on performance of partial vacuumed thermosyphon, Iranian journal of chemical engineering, 2009.
[4] B.jiao, L.M.qui, investigation on effect of filling ratio on steady state heat transfer performance of a vertical TPCT, applied thermal engineering 28 (2008), 1417-1426.
[5] Z.Q. long, P.Zhang, Impact of cooling conduction and filling ratio on heat transfer limit of cryogenic thermosyphon, cryogenics 52 (2012) 60-76.
[6] A. Ordar-Flores Flores, finding to improve the performance of a two phase flat plate solar system using acetone and methanol as working fluid, solar energy 86 (2012) 1089-1098.
[7] S.H.Noie, S.zeinali Heris, heat transfer enhancement using Al2O3/water Nano fluids in TPCT, Int. J. Heat and fluid flow 30 (2009) 700-785.
[8] A. Brusly Solomon, A. Mathew, thermal performance of anodized TPCT, experimental thermal and fluid science 48 2013 49-57.
[9] Hamidreza Shabgarda, Bin Xiaoa, Thermal characteristics of a closed thermosyphon under various filling conditions, Int.J. Heat and mass transfer 70 2014 91-102.
[10] T.payakarak, P.terdtoon, correlation to predict heat transfer characteristics of an inclined closed two phase thermosyphon at normal operating condition, applied thermal engineering 20 (2000) 781-790.
[11] K.S. Ong, Md. Haider-E Alahi, performance of R-134a filled thermosyphon, applied thermal engineering 23 (2003) 2373-2381.
[12] Mehmet Esen, Hikmet Esen, experimental investigation of a two phase closed thermosyphon solar water heater, solar energy 79 (2005) 459-468.
|
