|
A Study On Effect Of Fused Deposition Modeling Process Parameters On Mechanical Properties
[Full Text]
AUTHOR(S)
Vinaykumar S Jatti, Savita V Jatti, Akshaykumar P. Patel, Vijaykumar S. Jatti
KEYWORDS
Fused Deposition Modeling, Process parameters, Mechanical Properties, One variable at a time approach
ABSTRACT
Fused Deposition Modeling (FDM) is a process for developing Rapid Prototype (RP) objects by depositing fused layer of material according the cross sectional geometry designed in the software. Various parameters used in the FDM process significantly affects the quality of parts produced. This work aims to study the effect of process parameters such as layer thickness, printing speed, infill percentage and extrusion temperature on mechanical properties of FDM printed parts. Mechanical properties such as tensile strength, impact strength, flexural strength and surface roughness of these printed parts are been studied. One variable at a time approach has been adopted to carry out this work.
REFERENCES
[1] SH Masood, “Advances in Fused Deposition Modeling”, Swinbume University of Technology, Melbourne, VIC, Australia. © Elsevier 2014.
[2] Dudescu Cristian, “Effects Of Raster Orientation, Infill Rate And Infill Pattern On The M echanical Properties Of 3d Printed Materials”, Acta Uiversitatis Cibiniensis – Technical Series Vol. Lxix 2017 © 2017 “Lucian Blaga” University Of Sibi
[3] João Fernandes, Marco Leite, Augusto dues, Luis Reis, M.F. Vaz, “Study Of The Influence Of 3d Printing Parameters On The Mechanical Properties Of Pla”, 3rd International Conference on Progress in Additive
[4] Manufacturing (Pro-AM 2018) 14-17 May 2018, Singapore.
[5] Friedrich Bahr, Engelbert westcamper, “Correlations between Influencing Parameters and Quality Properties of Components Produced by Fused Deposition Modeling”, 51st CIRP Conference on Manufacturing Systems, © 2018 The Authors. Published by Elsevier B.V.
[6] Ngoc-Hien Tran, Van-Nam Nguyen, Anh-Vu Ngo, Van-Cuong Nguyen, “Study on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality”, Ngoc-Hien Tran. Int. Journal of Engineering Research and Application ww.ijera.com ISSN : 2248-9622, Vol. 7, Issue 12, ( Part -2) December 2017, pp.71-77.
[7] Pritish Shubham, Arnab Sikidar and Teg Chand, ―The Influence of Layer Thickness on Mechanical Properties of the 3D Printed ABS Polymer by Fused Deposition Modeling‖, Key Engineering Materials Submitted: 2016-04-09, ISSN: 1662-9795, Vol. 706, pp 63-67, © 2016 Trans Tech Publications, Switzerland.
[8] WenzhengWu, Wenli Ye, Zichao Wu , Peng Geng, Yulei Wang and Ji Zhao, ―Influence of Layer Thickness, Raster Angle, Deformation Temperature and Recovery Temperature on the Shape-Memory Effect of 3D-Printed Polylactic Acid Samples‖, School of Mechanical Science and Engineering, Jilin University, Renmin Street 5988, Changchun 130025, China.
|
